1.The cement surface of earth wants the desiccation, neat.
2.The brush is last a waterproof paste in lay,on all sides brattishing foot beard brush high 20 cm.
3.Taking the keel brush apply oil with 14% of aqua rate below paints,using after needing the shank plumping screw affix the cement surface of earth is last, the wood keel needs the small port in turn on in the center,make keel backward flow ventilated ,or use the high wood in packing sheet in tectonic plate keel may also,(incapability water use silt stemming) then besprinkle top mothballs.
4.Use a multiple layer board1.2-1.8 cm, saw first 120 ×60cm a rectangle cake, brush the apply oil paint, needing shank post will its fix to must stay a 1cm gap at joint in the top of wood keel with the screw.
5.Spread on many laminations a the lay defends the paper of tide(namely the cotton of tectorial membrane foaming),connecting the port with each other the 20 cm,then spread the last floor board wood.Spreading the hour of floor board needs to use the wood screw fixedly good.( incapability usage any glue)
6.Building the hour of floor board want to depend on air space humidity and region differences,wanting to is ordered by pine such as the hour of special and damp region in Northeast of China and in East China,installation floor board,( with the board puts with of board to put a the poker of sheet or bale band is allow roughly 0.5 cm,need the felting completes to take out) the in order to prevent affects by damp and cold the bulge mutation pattern in the damp season.In the northeast,north China and the special dry region in some installation ground wants to depend a little bit tight, with the nature joins together for allow, on all sides by the wall the place all stays an 1.5 cm enzyme regulation seam.
7.The felting of floor board after completing, draw the last floor board wax immediately( the attention draws only in gap at joint,the incapability draws on the board surface)
8.Please according to the above the felting of device and maintain, otherwise,appear strain or other questions,a loss for resulting in has nothing to do with our company.
